DANGER
During operation, it is forbidden
to open the protective door
Attention To prevent overheat
ing rest for 5 minutes after 30
OGLVW
Maintenance attention
1. The air
Finst all change time within 15-20 hours of use, and then change it every 70-100 hours, which shall be determined according to the working conditions Please use SAE 10W-30/15w40 according to season
ment shall be cleaned every & 10 hours is deaned more than
ed more than 6 times, please replace the air ar element
1. Regularly check whether
whether the catar, cater head and fing belts are lose and missing teeth. If they are lons, please sighten them Missing teeth will lead to dynamic balance imbalance and excessive vibration
& Regularly check the lightness of the track. The standard tightness is 30mm-50mm from the highest art point pulled up and down between the driving wheel and the front direction wheel to the lowest concave
Thank you for purchasing and using our machine!
ALA-AO
B
& Reparty cheex, epen the panel and clean the floating it with compressed air at least once a week. De not wash with wat
5. Regularly clean the
whether the header ng bats are in and maintain a certain clearance to ensure smooth Ping of the header
7. The dotar and reduar shall be maintained twice a year. During maintenance, the drive wheel shall be removed, the reducer shall inside the dive wheel shall be disassembled, and the lithium base gase
shall be p
& Recleaning with d
the generator belt. The belt tangin is 1mmf the machine has low power generation voltage or bet sig sound, please adjust the tension or replace the belt in time
3. Ar the work is completed every day, check the remaining power through the voltage indicator. When the power of the mover is lower than 90%, please charge when the charger indicator is green, the
during e
16. you have any questions, please contact the salesperson
H
Ao
VOLTAGE
DC V
VOLTMETER
ERGENA
THE ENGINE DROPS FOR
STARTING AND BOUNCES
AFTER STARTING
探純水
黑松|
15x
MASTER SWITCH
KG 35KG
ENGINE MISSES
ENGINE START
AA